Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·787·
Variables related to spindle position.
·sn· Name, logic number or index of the spindle.
SPINDLE FOLLOWING ERROR.
(V.)[ch].A.FLWE.sn
(V.)[ch].SP.FLWE.sn
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Spindle following error.
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.FLWEST.sn
(V.)[ch].SP.FLWEST.sn
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Linear estimate of the spindle following error (lag).
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
V.A.TPOS.S Spindle S.
V.SP.TPOS.S Spindle S.
V.SP.TPOS Master spindle.
V.A.TPOS.5 Spindle with logic number ·5·.
V.SP.TPOS.2 Spindle with index ·2· in the system.
V.[2].SP.TPOS.1 Spindle with index ·1· in the channel ·2·.
V.A.FLWE.S Spindle S.
V.SP.FLWE.S Spindle S.
V.SP.FLWE Master spindle.
V.A.FLWE.5 Spindle with logic number ·5·.
V.SP.FLWE.2 Spindle with index ·2· in the system.
V.[2].SP.FLWE.1 Spindle with index ·1· in the channel ·2·.
V.A.FLWEST.S Spindle S.
V.SP.FLWEST.S Spindle S.
V.SP.FLWEST.S Master spindle.
V.A.FLWEST.5 Spindle with logic number ·5·.
V.SP.FLWEST.2 Spindle with index ·2· in the system.
V.[2].SP.FLWEST.1 Spindle with index ·1· in the channel ·2·.
To Next Page
Loading...
