Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·817·
Variables related to the active tool and to the next one.
This variable is not valid for turning tools.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.TOI[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Radius wear.
This variable is not valid for turning tools.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.TOL[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Length.
This variable is not valid for turning tools.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.TOK[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Length wear.
This variable is not valid for turning tools.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.TOAN[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Penetration angle.
Syntax.
·ch· Channel number.
V.[2].TM.TOR Channel ·2·. Active tool offset.
V.[2].TM.TOR[3] Channel ·2·. Tool offset ·3·.
V.[2].TM.TOI Channel ·2·. Active tool offset.
V.[2].TM.TOI[3] Channel ·2·. Tool offset ·3·.
V.[2].TM.TOL Channel ·2·. Active tool offset.
V.[2].TM.TOL[3] Channel ·2·. Tool offset ·3·.
V.[2].TM.TOK Channel ·2·. Active tool offset.
V.[2].TM.TOK[3] Channel ·2·. Tool offset ·3·.
To Next Page
Loading...
