Fagor CNC 8060 - Page 832

·832·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables associated with the tool being prepared.
Syntax.
·ch· Channel number.
TOOL STATUS.
(V.)[ch].G.TSTATUS
Variable that can be read from the program.
The variable returns the value of block preparation.
Tool being prepared. Tool status.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
FAMILY OF THE TOOL.
(V.)[ch].G.TLFF
Variable that can be read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Tool being prepared. Family code.
Syntax.
·ch· Channel number.
TOOL MONITORING.
(V.)[ch].G.TOMON
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool offset being prepared. Type of tool life monitoring.
Syntax.
·ch· Channel number.
V.[2].G.NXTOD Channel ·2·.
V.[2].G.TSTATUS Channel ·2·.
Value. Meaning.
0 Tool available.
1 Tool available.
2 Tool worn out.
V.[2].G.TLFF Channel ·2·.
V.[2].G.TOMON Channel ·2·.