·848·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the programmed functions.
(V.)[ch].G.TOOLDIR
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Tool orientation.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].G.PLAXNAME1
(V.)[ch].G.PLAXNAME2
(V.)[ch].G.PLAXNAME3
Variable to be read via interface.
Name the main axes of the channel.
A=70 A1=71 A2=72 A3=73 A4=74 ... A9=79
B=80 B1=81 B2=82 B3=83 B4=84 ... B9=89
C=90 C1=91 C2=92 C3=93 C4=94 ... C9=99
V.[2].G.TOOLDIR Channel ·2·.
Value. Meaning.
1 The tool is positioned in the positive direction of the axis.
2 The tool is positioned in the negative direction of the axis.
To Next Page
Loading...
