Fagor CNC 8060 - Page 875

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·875·
Variables related to the independent axes.
·xn· Name, logic number or index in the channel of the axis.
POSITIONING MOVE.
(V.)[ch].A.IPPOS.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Coordinate programmed for the independent axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index in the channel of the axis.
(V.)[ch].A.ITPOS.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Theoretical coordinate of the independent axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index in the channel of the axis.
(V.)[ch].A.IPRGF.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Feedrate programmed in the independent axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index in the channel of the axis.
(V.)[ch].A.IORG.xn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Offset for the independent axis.
V.A.FRO.Z Z axis.
V.A.FRO.4 Axis with logic number ·4·.
V.[2].A.FRO.1 Axis with index ·1· in the channel ·2·.
V.A.IPPOS.Z Z axis.
V.A.IPPOS.4 Axis with logic number ·4·.
V.[2].A.IPPOS.1 Axis with index ·1· in the channel ·2·.
V.A.ITPOS.Z Z axis.
V.A.ITPOS.4 Axis with logic number ·4·.
V.[2].A.ITPOS.1 Axis with index ·1· in the channel ·2·.
V.A.IPRGF.Z Z axis.
V.A.IPRGF.4 Axis with logic number ·4·.
V.[2].A.IPRGF.1 Axis with index ·1· in the channel ·2·.