Fagor CNC 8060 - Page 878

·878·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the independent axes.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.SYNCVELOFF.xn
(V.)[ch].A.SYNCVELOFF.sn
(V.)[ch].SP.SYNCVELOFF.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Velocity offset for synchronization.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.GEARADJ.xn
(V.)[ch].A.GEARADJ.sn
(V.)[ch].SP.GEARADJ.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Fine adjustment of the gear ratio during synchronization.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.SYNCPOSOFF.Z Z axis.
V.A.SYNCPOSOFF.S Spindle S.
V.SP.SYNCPOSOFF.S Spindle S.
V.SP.SYNCPOSOFF Master spindle.
V.A.SYNCPOSOFF.4 Axis or spindle with logic number ·4·.
V.[2].A.SYNCPOSOFF.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCPOSOFF.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCPOSOFF.1 Spindle with index ·1· in the channel ·2·.
V.A.SYNCVELOFF.Z Z axis.
V.A.SYNCVELOFF.S Spindle S.
V.SP.SYNCVE LOFF.S Spindle S.
V.SP.SYNCVELOFF Master spindle.
V.A.SYNCVELOFF.4 Axis or spindle with logic number ·4·.
V.[2].A.SYNCVELOFF.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCVE LOFF.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCVELOFF.1 Spindle with index ·1· in the channel ·2·.
V.A.GEARADJ.Z Z axis.
V.A.GEARADJ.S Spindle S.
V.SP.GEARADJ.S Spindle S.
V.SP.GEARADJ Master spindle.
V.A.GEARADJ.4 Axis or spindle with logic number ·4·.
V.[2].A.GEARADJ.1 Axis with index ·1· in the channel ·2·.
V.SP.GEARADJ.2 Spindle with index ·2· in the system.
V.[2].SP.GEARADJ.1 Spindle with index ·1· in the channel ·2·.