71
S. No Photos 50 HP category
1
11 Tyne
width of Cut- 2550-2570 mm
Weight- 300-350 Kg
LxWxH- 915x2620x1015mm
Trailed type: 8x8
Width of cut: 1725-1750 mm
Weight- 700-750 Kg
Disc diameter: 560/610 mm (opt)
Mounted type: 8x8
Width of cut: 1725-1750 mm
Weight: 500-580 Kg
Disc dia: 560/610 mm
LxWxH- 2350x1825x1270mm
3
Rotavator - 6 feet 7 feet
No. of blades- 42 48
Weight:- 500kg 530kg
Working width:- 1800mm 2120mm
4
2 Furrow (12'')
Width of cut: 600 to 650 mm
Working depth: 240-280 mm
Weight: 350-400 Kg
LXWXH : 2208x1370x1490
5
6 feet
6
~5 ton
Total weight: 2000-2500 Kg
LXWXH: 3060x1836x612mm
7
Lifting Capacity at Pivot Pin height (900Kg)
S.W.L (Safe Working Load with Standard
Bucket) (800 Kg) Standard -Bucket Width (1.65 m)
Front End Loader Weight (~750 kg)
Disc Harrow
2
IMPLEMENT LIMITATION CHART CRDI 50-V
Implement
Cultivator
Rigid type
Rotavator
Reversible
MB Plough
Rear Mower
Haulage
Loader
NOTE:
• Implement size may vary depending on soil and operating conditions.
• Strictly follow the instructions outlined in the operator's manual of the mounted or trailed machinery or
trailer, and do not operate the combination tractor - machine or tractor - trailer unless all instructions
have been followed.
• For drawbar applications (plough, harrow, cultivator etc.), use of 4 wheel drive mode is mandatory for
better traction & durability.
• While using tractor in sprayer application, it is recommended that operator wears PPE kit so as to get
protection from the chemicals being used in sprayer
• Maximum vertical load on the rear hitch : 500 kg. .
To Next Page
Loading...
