Faro FaroArm Quantum Manual

FaroArm
®
Manual
January 2009
27
Chapter 1: Introduction to the FaroArm
®
Serial Number Label
The FARO Laser Line Probe Serial Number label contains the serial
number, laser information, certification, warning logotype and
manufacturing date. See Figure 1-23 for the location of the laser beam
aperture.
Servicing
The FARO Laser Line Probe should only be serviced by FARO
Customer Support technicians. There are no user serviceable parts in
this device. DO NOT attempt to open the casing or disassemble the
device at any time.
If the Laser Line Probe is not operating properly, contact FARO
Customer Support. If it has malfunctioned, power down the system,
remove it from the FaroArm and return it to FARO Customer Support
for repair.
WARNING: DO NOT ATTEMPT TO OPEN THE LASER LINE
PROBE CASE. THERE ARE NO USER SERVICABLE PARTS.
Figure 1-25 Serial Number Label
655 nm Laser, 5 mW
LASER LIGHT
DO NOT STARE INTO BEAM
OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
CDRH CLASS II LASER PRODUCT, CONFORMS TO 21 CFR 1040
IEC CLASS 2M LASER PRODUCT, CONFORMS TO IEC/EN 60825-1/A2:2001
Serial Number:
Manufactured:
LLP000702881 Rev4.3
Aug 20, 2007
FARO Technologies, Inc. 125 Technology Park Lake Mary, FL 32746 U.S.A
LASER LIGHT
DO NOT STARE
INTO BEAM OR VIEW
DIRECTLY WITH
OPTICAL INSTRUMENTS
CDRH CLASS II LASER PRODUCT,
CONFORMS TO 21 CFR 1040
IEC CLASS 2M LASER PRODUCT,
CONFORMS TO IEC/EN 60825-1/A2:2001
655 nm Laser, 5 mW
Serial Number:
Manufactured:
FARO Technologies, Inc.
125 Technology Park • Lake Mary, FL 32746 • USA
LLP00074003 Rev1.0
Nov 17, 2007
WARNING
LOGOTYPE
CERTIFICATION
IDENTIFICATION
08M46E00_FaroArmUSB.book Page 27 Tuesday, February 17, 2009 1:42 PM

Faro FaroArm Quantum Specifications

General

Brand	Faro
Model	FaroArm Quantum
Category	Robotics
Language	English