FaroArm
®
Manual
January 2009
91
Chapter 3: CAM2® Q
• Distance Interval: press the FRONT button, or the G key, to start
the distance interval. Collect a single reading when the probe
moves a distance. Choose this radio button, enter the distance value
and press OK.
• Time Interval: press the FRONT button, or the G key, to start the
time interval. Collect a single reading over time. Choose this radio
button, enter the time value and press OK.
08M46E00_FaroArmUSB.book Page 91 Tuesday, February 17, 2009 1:42 PM