FARO
®
Laser Scanner Focus
3D
X 130 Manual
January 2014
41
Chapter 5: Getting Started
Entering Scanner Information
You can specify a scanner name and the owner of the Focus
3D
X 130. Starting
from the Home screen, go to Home > Manage > General Settings > Scanner
Details.
Scanner name - Click to change the name of the scanner.
Owner - Click to enter the name of the company or person owning the scanner.
For more information, see “Scanner Details” on page 86.
Scanning
This chapter will give you a brief description on how to set the scanning
parameters in order to capture your first scans. Normally, you would provide and
enter project information before starting with your scan project. This will be
described later. For more information, see “Managing Scan Projects” on
page 68.
Setting the Scanning Parameters
(Home > Parameters)
Scanning parameters like resolution, quality or the scanning angles are the
parameters used by the scanner for recording the scan data. There are two ways
to set the scanning parameters: by changing them manually or by selecting a scan
profile which is a predefined set of scanning parameters. When selecting a scan
profile, its settings will overwrite the scanning parameters.
Figure 5-15 Scanner Details
To Next Page
Loading...
