FARO
®
Laser Scanner Focus
3D
X 130 Manual
January 2014
50
Chapter 5: Getting Started
historical buildings). Compared to even weighted metering, this mode will
increase scan duration by approximately 14 seconds.
Advanced Settings
(Home > Parameters > Advanced Settings)
Clear Contour - Enables the dynamic contour filter. While scanning, this
hardware filter will remove incorrect measurements at the edges of objects. It
removes scan points resulting from hitting two objects with the laser spot which
mainly happens at the edges of objects.
Figure 5-26 Zenith weighted metering
Figure 5-27 Advanced Scanning Settings
To Next Page
Loading...
