4-29
1
2
3
4
Settings Menu
[S9] Information
4-8 [S9] Information
This displays the information of this product.
Selectable option Function description
[S9] - [I1] Serial number Displays manufactured time.
[S9] - [I2] Firmware ver. Displays firmware version.
[S9] - [I3] Hardware ver. Displays hardware version.
[S9] - [I4] Temperature Displays internal temperature of this product in Celsius.
[S9] - [I5] Operation time Displays operating time after reset.
[S9] - [I6] Total time Displays total operating time of this product.
[S9] - [I7] Counter value
*1
Displays count value of Counter mode.
[S9] - [I8] Received light Displays the received light amount set for output 1 (0 to 254%).
100 to 254%: Stable detection
51 to 99%: Detection possible
0 to 50%: Unstable detection (not recommended)
Not supported: Not supported with the set teach mode
*2
• With the alarm display (page 4-12) set to “On,” an alarm message will be
displayed on the display, when the value of this item falls below 50%.
[S9] - [I9] No. of devices
*3
Displays the total number of connected units including the main unit.
[S9] - [IA] Device number Displays the unit number of the product from the main unit (its number is 1).
[S9] - [IB] Edge peak
*4
Displays the edge peak value of Edge mode.
*1: Displayed when “On” is selected in “[D6] Counter”.
*2: This is not available when the teach is set to “2-point Zone” or “1-point Zone” teach mode or Threshold
mode is “Edge height”.
*3: Displayed only on the main unit.
*4: Displayed when “Edge height” is selected in “[D2] Threshold mode”.
To Next Page
Loading...