EasyManua.ls Logo

Fastus D4RF Series - Page 125

Fastus D4RF Series
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-3
1
2
3
4
5
6
Appendix
Specications
Type
Stand-alone unit
(IO-Link device)
Inter-connection main unit
Inter-connection
expansion unit
Rating Supply
voltage
SIO mode 12 to 30 VDC ± 10% including
10% ripple (p-p)
12 to 24 VDC ± 10% including
10% ripple (p-p)
Supplied from main unit
(12 to 24 VDC ± 10%
including 10% ripple (p-p))
IO-Link mode 18 to 30 VDC ± 10% including
10% ripple (p-p)
—
Current
consumption
Eco mode:
Off
52 mA (at 12 VDC), 33 mA (at
24 VDC), 29 mA (at 30 VDC)
52 mA (at 12 VDC), 33 mA (at 24 VDC)
Eco mode:
On
43 mA (at 12 VDC), 29 mA (at
24 VDC), 26 mA (at 30 VDC)
43 mA (at 12 VDC), 29 mA (at 24 VDC)
Warm-up time 300 ms
Applicable regulations EMC EU EMC directive (2014/30/EU)
UK directive EMC (The Electromagnetic Compatibility Regulations 2016)
Environment EU RoHS directive (2011/65/EU)
UK RoHS (The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012)
China RoHS (MIIT Order No.32)
Applicable standards EN 60947-5-2
NRTL certification UL Listed or Recognized Components Proximity Switch Certified for US and Canada.
*3
Company standards Noise resistance Feilen Level 4 cleared
Protection circuit Reverse connection protection, Overcurrent protection
Environmental
resistance
Ambient temperature
*1
/
humidity
−25 to 55°C/35 to 85%RH (no freezing or condensation)
Ambient illuminance Sunlight: 10000 lx or less, incandescent light: 3000 lx or less
Vibration resistance 10 to 55 Hz; Double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
Shock resistance Approx. 50 G (500 m/s
2
) 3 times in each of the X, Y, and Z directions
Degree of protection IP54
Material Housing, cover: PC
Weight Cable model: approx. 71 g (including cable), Connector model: approx. 25 g
Included accessories Mounting bracket, Instruction manual
*1: The load current and operating temperature are limited by the number of connected units (including inter-
connection main unit) as shown in the table below.
Number of connected units 1 unit 2 units 3 to 5 units 6 to 16 units
*4
Max. input current of main unit 152 mA 144 mA 360 mA 1152 mA
No. of control output per unit
1 2 1 2 1 2 1 2
Load current per control output 100 mA 50 mA 20 mA 10 mA 20 mA 10 mA 20 mA 10 mA
Ambient temperature 55°C 55°C 50°C 45°C
*2: Preset loading selectable only on 2-output and 1-input models.
*3: Products in lot number 2235H and later are UL-certified.
*4: When 6 or more units connected and used as UL certified product, use the product under the conditions
shown in the table below.
Number of connected units 6 to 8 units 9 to 16 units
Max. input current of main unit 576 mA 1152 mA
No. of control output per unit
1 2 1 2
Max. load current per output 20 mA 10 mA 20 mA 10 mA
Upper limit of ambient
temperature
45°C 40°C

Table of Contents