Fayat DYNAPAC CT3000 - Safety-During Operation

Safety – Operation
2018-02-20 4812325559EN 3
Safety-During operation
Operation near edges
While operating near to edges or holes, make sure that at least
half of the tamping rollers are on a compacted ground.
Remember that the center of gravity of the machine
shifts to the external side when operating the
steering wheel. As an example: move to the right
when the steering wheel is shifted to the left.
It is recommended to use the Roll Over Protective
Structure (ROPS) while operating on slopes or
irregular ground.
Always avoid when possible to operate
transversally on slopes. When on slopes, preferably
operate up and down.
Always use the first speed when operating on
slopes.
Always operate the machine with doors closed and
seat belt fastened.
Fig. Positioning of the tamping rollers
while operating near edges or holes.