Fayat DYNAPAC CT3000 - Transportation

Towing
44 4812325559EN 2018-02-20
Transportation
Machine transportation
1. Lift the leveling or tilting blade, if equipped.
NOTE: If necessary, remove the blade to perform the
transportation.
2. Shim the tamping cylinders.
3. Tie the machine on the four fixing spots marked with safety
decals. Use proper chains or steel cables.
4. Lock the chassis joint.
Before turning off the machine, lock the
chassis joint.
Extend the bar (1) and lock it with the pin and
its lock (2) to the rear segment of the chassis.
Remember to remove the joint lock before using
the machine.
Fig. – Joint lock
1
2