Maintenance - Symbols and lubricants
2018-02-20 4812325559EN 49
Introduction
Warning symbols
ATTENTION! Damage to the machine and its
components
CAUTION! Your safety might be involved.
The operator should read the safety manual that
comes with the machine. Always follow the
safety instructions and do not remove the
manual from the machine.
Main
This Manual contains information about the operation and usage
of the machine. For instructions and information about
lubrication and maintenance, please refer to the respective
Operation Section.
The machine requires special care in order to ensure
its adequate operation. Keep the machine clean, so
leakage, loose bolts and connections, as well as
other faults may be easily detected.
Read carefully all the instructions before
performing any service.
When operating the engine in enclosed rooms,
check if there is proper ventilation to release the
exhaust gases.
When performing maintenance services on the
machine , always lock the chassis joint and the
blade, to prevent serious injury.
TAKE CARE OF THE ENVIRONMENT: Do not
discard lubricant or fuel oil in places which
may infect the soil or the environment.
To Next Page
Loading...
