Fayat DYNAPAC CT3000 - Identification Plates

Identification plates
8 4812325559EN 2018-02-20
Identification plates
Machine identification plate
The identification plate (1) is located on the left side of the
machine, in the lower chassis below the fuel tank.
This plate indicates the name of the manufacturer and its
address, type of machine, serial number and other important
information about the product.
When ordering replacement parts, always inform the serial
number and the machine model.
NOTE: When ordering replacement parts, always inform the
serial number and the machine model.
Product Identification Number (PIN) on the
chassis
The product identification number - PIN (2) is engraved on the
front chassis on the right side right below the fuel tank (1).
1
1
Fig. Location of identification plate on the
machine.
1 – Identification plate
Fig. Front chassis
2 – PIN