60 4812325559EN 2018-02-20
Daily (Every 10 hours of operation)
1. The interlock, emergency stop and parking brake must
be checked daily before operating. A function check of
the interlock and emergency stop requires a restart.
2. The interlock function is checked by the operator
standing up from the seat when the machine is moving
very slowly forwards/backwards. (Check in both
directions) .Hold the steering wheel firmly and brace
yourself for a sudden stop. A buzzer goes and after
4 seconds the engine switches off and the brakes are
activated.
3. Check the function of the emergency stop by pressing
the emergency stop button when the machine is moving
slowly forwards/backwards . (Check in both
directions) . Hold the steering wheel firmly and brace
yourself for a sudden stop . The engine switches off
and the brakes are activated .
4. Check the function of the parking brake, start the
machine engine. For further information, please refer to
the chapters “Before drive the engine” and “Engine
start”, in the Operation section, activate de parking
brake and the test button 24 holding it activated. Press
the work brake, put the first gear and accelerate the
machine slowly forwards/backwards. The machine must
remain stopped.
To Next Page
Loading...
