Fayat DYNAPAC CT3000 - Braking

Brakeage
38 4812325559EN 2018-02-20
Braking
Service brake
The service brake is activated through the brake pedal (1).
The machine has a hydraulic service brake system, with two
independent circuits, one for the front axle and one for the rear
axle.
Parking brake
The parking brake and the emergency transmission disc, has a
mechanical activation through a spring that is hydraulically
released and operated by button (2) located on the side control
panel.
When pressed, the parking brake is activated. To release the
parking brake, slide the red button side backwards (towards the
operator) and change the switch's position.
NOTE: The parking brake must be activated before turning on
the machine.
Make sure that the machine is parked on a safe
place and that is not blocking the traffic.
1
Fig. – Service brake pedal
Fig. – Parking brake button
2