Fayat DYNAPAC CT3000 - Biannually (Every 1,000 Hours of Operation); Check the Condition of the Hydraulic Hoses and

Maintenance - By-annually (Every 1,000 hours of operation)
2018-02-20 4812325559EN 83
Bi annually (Every 1,000 hours of
operation)
Check the condition of the hydraulic hoses and
connections
Verify if the hydraulic system hoses and connections are loose,
cracked or damaged, and if so, replace them.
Also check the seal rings and clamps. If they are damaged,
replace them.
Fig. – Hydraulic connections