Fayat DYNAPAC CT3000 - Stopping

Brakeage
40 4812325559EN 2018-02-20
Stopping
Stopping the engine
1. Stop the machine positioning the Forward/Backward lever
(1) to the neutral position.
2. Release the accelerator pedal (2) and keep the engine
working in low idle. Allow the engine to keep working about
3 to 5 minutes.
3. Turn off the engine turning the switch (3) to the “O” position.
4. Push the blade control lever (4) smoothly forward until it
lowers all the way to the ground, if it is not locked.
In case of long inactivity periods, the main switch
should be turned off.
2
1
Fig. – Steering pedals and controls
3
4
Fig. – Side panel