EasyManua.ls Logo

Fayat DYNAPAC CT3000 - Technical Specifications

Fayat DYNAPAC CT3000
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications
2018-02-20 4812325559EN 7
Technical specifications
Vibrations Operator station
(ISO 2631)
Vibration levels have been measured according to the operational cycle
described in the EU directive 2000/14/EC on machines equipped for the EU
market with operator seat in transport position.
Measured whole-body vibrations are below the action value of 0.5 m/s² as specified in
Directive 2002/44/EC. (Limit is 1.15 m/s²)
Measured hand/arm vibrations also were below the action level of 2.5 m/s² specified
in the same directive. (Limit is 5 m/s²)
Noise level
Sound levels have been measured according to the operational cycle described
in the EU directive 2000/14/EC on machines equipped for the EU market with
operator seat in transport position.
Guaranteed sound power level, L
wA
103 dB (A)
Sound pressure level at the operator's ear (platform),L
pA
85 ±3 dB (A)
Sound pressure level at the driver's ear (cab),
LpA
80 ±3 dB (A)
During operation the above values may differ because of the actual operational
conditions.
Electrical system
Machines are EMC tested in accordance with EN
13309:2000 'Construction machinery'

Table of Contents

Related product manuals