2018-02-20 4812325559EN 37
Tilting blade (Optional)
The tilting blade allows the operator to adjust hydraulically the
lifting of the blade and carry out inclination and regulation
simultaneously. The versatility of the tilting blade gives the
machine the capacity of operating in several usages, as in
leveling operations, spreading the material, side unloading and
“V” trenching.
NOTE: The blade equipped on the machine is not the dozer
kind.
Tilting blade operation
The leveling blade control lever – joystick (1) has eight stages:
LIFT: move the lever backwards
RETAIN: release the lever in any stage
LOWER: move the lever forward
FLUCTUATE: move the lever completely
forward
LEFT ANGULATIONS: move the lever
laterally to the left.
RIGHT ANGULATIONS: move the lever
laterally to the right.
LEFT INCLINATION: press the button and
move the lever laterally to the left to incline
the blade to the left; release the button to
stop the movement.
RIGHT INCLINATION: press the button and
move the lever laterally to the right to incline
the blade to the right; release the button to
stop the movement.
If the lever is released on the stage “Lift” or “Lower” it will always
return to the stage “Retain”.
If the lever is released in the “Fluctuate” stage, it will not return
to the “Retain” stage.
Fig. - Tamping roller with tilting blade
Fig. – Tilting blade control lever
To Next Page
Loading...
