FCI MT100 - Appendix Adrawings; Table 29 - MT100 Drawings in Appendix A

MT100 Multipoint Flow Meter APPENDIX A – DRAWINGS
APPENDIX A DRAWINGS
This appendix contains MT100 technical drawings. Table 29 below summarizes the drawings.
Table 29 – MT100 Drawings in Appendix A
Dwg. No.
Dwg. Type
Page No.
Description
025908
System
99
MT100 FM System Certification, FM US/CA, ATEX, IECEx
405037
Outline Instl.
111
MT100M: Flanged Process Connection, Hazardous Locations, Local And Remote
405038
Outline Instl.
113
MT100M: 2" NPT Process Connection, Hazardous Locations, Local And Remote
405039
Outline Instl.
115
MT100M: Duct Flange Process Connection, Hazardous Locations, Local And Remote
405040
Outline Instl.
119
MT100S: Compression Fitting, Hazardous Locations, Local And Remote
405041
Outline Instl.
121
MT100S: Flanged Compression Fitting, Hazardous Locations, Local And Remote
405042
Outline Instl.
123
MT100S: Low Press. Packing Gland, 1-¼" NPT, Hazardous Locations, Local And Remote
405043 Outline Instl. 125 MT100S: Low Press. Packing Gland, Flanged, Hazardous Locations, Local And Remote
405044 Outline Instl. 127 MT100S: Med. Press. Packing Gland, 1-¼" NPT, Hazardous Locations, Local And Remote
025993 Wiring Dgm. 129 MT100M Wiring Diagram
025994 Wiring Dgm. 133 MT100S Wiring Diagram
Fluid Components International LLC 97