INSTALLATION MT100 Multipoint Flow Meter
Electronics Enclosure Label
Affixed to the inside enclosure door below the display window is a label that identifies various connectors and features on the MT100 main
board and optional extension (upper) board, as well as the visible part of the power supply board. See Figure 21 below. Use this label as a
guide to locating the SD card socket, the battery holder, input power fuse, and connectors (shown with function and terminal assignments).
Note that the board silkscreen also provides component identification.
Figure 21 – MT100 Electronics Enclosure Label
Fluid Components International LLC 24
To Next Page
Loading...
