FCI MT100 - APPENDIX E - CUSTOMER SERVICE; Customer Service;Technical Support

MT100 Multipoint Flow Meter APPENDIX C – HMI MENU OUTLINE (v1.09)
APPENDIX C HMI MENU OUTLINE (v1.09)
Initial Service Menu Screen (Tap “MENU” Button on Front Panel)
Menu Screen Continued (Tap ‘NEXT’ on Initial Service Menu Screen)
Service (Basic Menus)
Select Group
Alarm Ack
Diagnostics
Set-up
LoggerSDcard
Device
FE Control
Reset Totalizer
Service (Expanded Menus)
Select Group
(Password)
1
1. (group 1 name)
2. (group 2 name)
3. (group 3 name)
4. (group 4 name)
5. (group 5 name)
Alarm Ack
(Alarms to acknowledge) or "(No Alarms)"
Diagnostics
Show Faults
(faults) or "(No Faults)"
Self Test
FE 1 IDR
(Password)
1
(Test in Progress countdown)
FE 1 IDR
60: <measured value> exp: <expected value> “Pass” or “Fail”
100: <measured value> exp: <expected value> “Pass” or “Fail”
150: <measured value> exp: <expected value> “Pass” or “Fail”
FE 2 IDR
FE 3 IDR
FE 4 IDR
FE 5 IDR
FE 6 IDR
FE 7 IDR
FE 8 IDR
Raw Signal
FE 1
F1 Raw Signal
RefR (ohms): <measured value - real time update>
dR (ohms): <measured value - real time update>
TCdR (ohms): <measured value - real time update>
Temp (degF): < measured value - real time update>
Flow (SFPS): <measured value - real time update>
FE 2
FE 3
FE 4
FE 5
FE 6
FE 7
FE 8
CEMS Results
Last Automatic CEMS
Interference Check Results
Calibration Test Results
Last Manual CEMS
Interference Check Results
Calibration Test Results
1
Password remains in effect for the entire time within the menu even for other items that also
require password entry. Password expires on menu exit.
Fluid Components International LLC 139