OPERATION MT100 Multipoint Flow Meter
Turning ON or OFF a Specific Flow Element
A specific flow element can be turned ON (online) or OFF (offline) as needed via the front panel HMI display.
1. Tap MENU on the front panel HMI display. This brings up a list of items under the heading Service.
2. Tap NEXT, and then tap FE CONTROL. This brings up the FE Control screen showing the ON/OFF status of the FEs in the system.
3. Tap on the FE that you want changed to the other state. This brings up the password entry screen if the password wasn’t entered
earlier in the menu session.
Fluid Components International LLC 40
To Next Page
Loading...
