Contents and general safety instructions
VI
Festo Festo P .BE CP FB13-E-EN en 9910c
Target group
This manual is intended exclusively for technicians trained in
control and automation technology, who have experience in
installing, commissioning, programming and diagnosing PRO-
FIBUS-DP slaves.
Service
Please consult your local Festo repair service if you have any
technical problems.
Notes on the use of this manual
This manual contains specific information on installing, com-
missioning, programming and diagnosingCP field bus node
FB13 for PROFIBUS-DP in accordance with EN 50170 (DIN
19245).
A CD ROM with device databases and bitmaps is supplied
with this manual. Information on the contents can be found in
the file “readme”.
InformationonfurtherCPmodulescanbefoundintheman-
ual for the relevant module. A summary is shown in fig. 0/1.
To Next Page
Loading...
