3. Diagnosis
3-21
Festo Festo P .BE CP FB13-E-EN en 9910c
3.5 Online diagnosis with COM Profibus 5.0
You can display error messages of the device-specific diag-
nosis with COM PROFIBUS 5.0.
1. Click the right-hand mouse button on the slave.
A menu appears.
2. Click on “Diagnosis...”
The mask “Bus parameter DP card” appears.
3. Select the bus parameters which correspond to your sys-
tem. Confirm with OK.
A window with diagnostic information appears.
4. Read the diagnostic information (see Fig. 3/11).
Fig. 3/11: Online diagnostic information with
COM PROFIBUS 5.0
To Next Page
Loading...
