Fundamental safety instructions
14 © Festo Didactic Conveyor
2.5 Pictograms
This document and the described hardware include warnings concerning possible hazards which may arise if
the system is used incorrectly.
The following pictograms are used:
Warning
Non-observance of this pictogram may result in personal injury or damage to property.
Warning
This pictogram indicates that the device must be switched off and its mains plug must be
removed from the electrical outlet before installation, repair, maintenance and cleaning
work. Observe the manual, in particular all safety instructions. Non-observance may result
in severe personal injury or damage to property.
Hot surface
This pictogram indicates danger of being burned if hot surfaces (up to roughly 85 C) are
touched.
Information
This symbol indicates operational tips and especially useful directions. This
symbol assists you to make optimal use of all of your machine’s functions.
Electrical shock
Warning of electrical voltage.
Laser beam
Non-observance of this pictogram may result in personal injury.
Strong optical radiance
Non-observance of this pictogram may result in personal injury.
To Next Page
Loading...
