Fundamental safety instructions
22 © Festo Didactic Conveyor
2.14 Intended use
This installation was developed and manufactured only for use in basic and further training in the fields of
automation and communication. It is intended exclusively for operation under expert guidance. It is not
designed for continuous operation.
In every phase of operation, the device must remain under expert supervision.
The training company / university and / or the instructors must / ensure that the trainees observe the safety
instructions described in the operating instructions.
Intended use also includes:
• observing all instructions from the operating instructions and
• compliance with inspection and maintenance work.
• No separate use of the application module
• Use only on the described modules
• Only to be operated with the robot program supplied by us.
Only the use listed in the operating instructions is considered intended use. Other uses, of whatever nature,
are considered improper use and are solely at the responsibility of the operator.
To Next Page
Loading...
