Legal information
8 © Festo Didactic Conveyor
1.2 Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation, in particular its warning notices and safety
instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems. Proper use of
Festo products.
Festo products may only be used for the applications described in the relevant technical
documentation. If products and components from other manufacturers are used, these
must be recommended or approved by Festo. Proper transport, storage, installation,
assembly, commissioning, operation and maintenance are required to ensure that the
products operate safely and without any problems. The permissible ambient conditions
must be complied with. The information in the relevant documentation must be observed.
1.3 Trademarks
All names identified by ® are registered trademarks of Festo. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
1.4 Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
1.5 Preface
Keeping the documentation safe
This documentation should be kept in a location where it can be easily accessed. Make the documentation
available to the personnel responsible.
To Next Page
Loading...
