Festo CP Lab - Visual Inspection; Safety Regulations

Design and function
54 © Festo Didactic Conveyor
5.2 Visual Inspection
WARNING
Any damages must always be repaired instantly.
Visual inspection has to be carried out prior to every commissioning!
Before you start the CP Application Module, you must always inspect the following parts regarding visual
damages and function:
 Electrical connections
 Mechanical components and connections
 Emergency Stop devices
5.3 Safety Regulations
WARNING
Any damages must always be repaired instantly.
The CP Application Module may only be operated on the following conditions:
 The technical condition – mechanically and electrically – of the CP Application Module is perfect.
 The CP Application Module is used in accordance with the regulations.
 The operating instructions have been read and understood.
 All safety devices are available and active.