Operation
© Festo Didactic Conveyor 81
6.3 Operator assistance and simulate application on free AP
The following chapter is valid for all basic modules (Bypass, Linear, branch). It is explained by way of
example on the basic module Linear.
Selection of the mode via the touch panel
Each free application position, which is not equipped with an application module, can provide a simple
operator assistance and a simulate application.
Thus every free AP provides the following functions in default mode as well as in MES mode:
1. Generic sequence simulation
2. Operator assictance
The application function is added with a fitted application module
1. Process simulation of the application
2. Operator assictance
3. Application Function
To Next Page
Loading...
