Fundamental safety instructions
© Festo Didactic Conveyor 19
2.7.5 Maintenance – Servicing – Malfunction Removal
Carry out adjustments and inspections in accordance with the specified intervals as instructed (see data
sheets).
Secure the compressed air and electricity supplies to prevent unintentional start-up. During inspections,
maintenance and repair work, the machine must be de-energized, de-pressurized and secured against
unexpected restart. All screw connections released during maintenance, inspection or repair work must be
checked to ensure correct re-tightening.
2.7.6 Organizational Measures
All existing safety devices must be checked at regular intervals.
2.7.7 Energy Limiting
There is a risk of fire if power supply is not of the energy limited type (see section 2.1).
2.7.8 Safe Handling
Safe handling of heavy equipment must be guaranteed! There is a risk of musculoskeletal harm if
instructions are not followed.
To Next Page
Loading...
