Festo CP Series User Manual

5.1 Fitting/removing CP terminal components
WARNING
Before starting the fitting, switch off the following:
• the compressed air supply
• the power supply to the valve solenoid coils
You thereby avoid:
– Uncontrolled movements of loose tubing.
– Sudden and undesired movements of the connected
actuators.
– Undefined switching states of the electronic compo-
nents.
5. Maintenance and conversion
CPV... 9802 5-3

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)