Festo CP Series User Manual

Important user instructions
This manual contains instructions on the dangers which
may occur if the CP valve terminal is not used correctly.
These instructions are always printed in italics, are fra-
med and also signalled by pictograms.
Danger
categories
A distinction is made between the following:
WARNING
This means that personal injury or damage to proper-
ty may occur if these instructions are not
observed.
CAUTION
This means that damage to property may occur if
these instructions are not observed.
PLEASE NOTE
This means that this instruction must also be obser-
ved.
VI CPV.. 9802

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)