Festo CP Series User Manual

Information on this manual
This manual contains specific information on the fitting,
installation, commissioning, maintenance and conver-
sion of the CP valve terminal. It includes only the des-
cription of the pneumatic components and refers to the
variations of the valve terminal listed in the table below.
Variants of the CP valve terminal type CPV..-VI..
With IC connection
Information on the
electric/electronic
components
In this manual
With MP connection
Information on the
electric/electronic
components
See product packing
With CP connection
Information on the
electric/electronic
components
See manual
"CP system,
Installation and
commissioning"
With AS-i connection
Information on the
electric/electronic
components
See product packing
Information on further CP modules can be found in the
manual for the relevant module. The following table
gives a summary.
VIII CPV.. 9802

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)