Festo CP Series User Manual

Manuals on the CP system Peripherals
Manual "CP system, installation and commissioning"
Content General basic information on the method of operation,
fitting, installation and commissioning of CP systems.
Manual "CP field bus node,
programming and
diagnosis"
"CP valve
terminal,
pneumatics"
"CP modules,
electronics"
Content Special information
on commissioning,
programming and
diagnosis related to
the nodes used.
Information on
fitting,
installing and
commissioning
CP valve
terminals.
Information on
fitting,
installing and
commissioning
CP input/output
modules.
Fig. 0/1: Manuals for the CP system
CPV... 9802 IX

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)