Festo CP Series User Manual

3.2.3 Connecting the electrical cables
Earthing the CP terminals
There is a connection for earthing the CP terminal on
both the left and right-hand end plates (see diagram).
1
Earth/ground connection
Fig. 3/5: Earth/ground connection of CP terminal
PLEASE NOTE
• Earth the CP terminal with MP, CP or AS-i
connection.
You thereby avoid electromagnetic interference
(EMC).
1
1
3. Installation
CPV... 9802 3-11

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)