Festo CP Series User Manual

Abbreviations
The following product-specific terms and abbreviations
are used in this manual.
Term Meaning
AS-i Actuator-Sensor interface
Blanking plate Plate without valve function, for filling empty locations
Components Common term for connector plates, end plates, blanking plates,
isolating plates, valve plates and pneumatic multiple connector plates
CP Compact Performance
CP cable Special cable for coupling the various CP modules
CP modules Common term for the various modules which can be integrated in a
CP system
CP system Complete system consisting of the CP field bus node and the
CP modules
CP valve terminal CP valve terminal (type 10) for fieldbus systems or with IC, MP or
AS-i-connection
CP valve terminal
with AS-i connection
CP valve terminal variant with serial connections enabling the the
CP valve terminal to be connected to the AS-i bus
CP valve terminal
with CP connection
CP valve terminal variant with plug and socket enabling the the
CP valve terminal to be connected to the field bus and further
CP modules
CP valve terminal
with IC connection
CP valve terminal variant on which each valve solenoid coil is
connected individually with a special CP cable
CP valve terminal
with MP connection
(multipin connection)
CP valve terminal variant with sub-D plug by means of which all
valve solenoid coils can be centrally connected
CPV10
CPV14
CPV18
Designation of CP terminal sizes
CP terminal with micro valve plates
CP terminal with mini valve plates
CP terminal with midi valve plates
Electrical cannector
plate
Plate with connections for MP, AS-i- or CP conections
CPV... 9802 XI

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)