Flamic SF600 - Main Technical Specifications

FLAMIC S.R.L. 5 Via dell’Artigianato, 36035 Marano Vicentino (Vicenza) - Italy
14
Dough sheeter SF450 - SF500 - SF600 Operation and maintenance manual (translation of original instructions) – Ed. 10/2016
Rev.02 10/2017
All rights reserved. Reproduction in whole or in part of this manual is prohibited.
2.6 MAIN TECHNICAL SPECIFICATIONS
Principal dimensions of the machines
Model BL BW A B C D E F G H L M
SF450B 500 450 1120 1280 - - 700 870 540 690 - 430
SF500B
850 500 1250 1860 2110 150 770 910 620 880 950 455
1000 500 1250 2160 2410 150 770 910 620 1030 1000 455
SF500
850 500 800 1860 2110 880 770 910 1335 1620 950 -
1000 500 800 2160 2410 880 770 910 1335 1760 1020 -
1200 500 800 2560 2810 880 770 910 1335 1920 1180 -
SF600
850 600 800 1860 2190 900 920 1065 1225 1619 960 -
1000 600 800 2160 2490 900 920 1065 1225 1757 1100 -
1200 600 800 2560 2890 900 920 1065 1225 1940 1250 -
1400 600 800 2960 3290 900 920 1065 1225 2123 1400 -
1600 600 800 3480 3810 900 920 1065 1225
See
Note
-
Note. When not in use, the BL ≤ 1400 mm tables can be folded for storage. The BL > 1400 mm tables can only
be positioned horizontally.
Key
BL = conveyor belt length
BW = conveyor belt width
For all other parameters see Figure 6
 with maximum bench length
 thick gauge cardboard box on pallet
 The minimum rolling thickness can be adjusted down to zero (in this case, the force exerted by the passage
of the dough would tend to slightly “separate” the rollers because it creates a small gap for it to pass through.
The minimum thickness used anyway depends on the type of dough being processed.
Maximum batch size: SF450: 3 kg SF500: 5-6 kg SF600: 7-8 kg
POWER SUPPLY
All machines except version “V”
3-phase + earth (L1 + L2 + L3 + PE)
Supply voltage: 230 Volt or 400 Volt
Frequency: 50 Hz, 60 Hz
Version “V” machines
Single phase + earth (L + N + PE)
Supply voltage: 230 Volt
Frequency: 50 Hz, 60 Hz
Other technic
al specifications
Weigh
t

with packaging 
Roller
diam.
Rolling thickness

Nominal
power
Max belt
speed
Weight Dimensions min. max
Model
[kg] [kg] [cm] [mm] [mm] [mm]
[kW]
[cm/s]
SF450
B
95 111 93 x 55 x 112 60 0 35 0.55 50
SF500
B
132 154 100 x 100 x 116 60 0 35 0.55 50
SF500 186 215 97 x 97 x 218 60 0 35 0.55 50
SF600 247 283 120 x 120 x 165 70 0 40 0.75 50
Cutting
unit
23 30 70 x 51.5 x 23.5
Trolley
for
SF450
B
70 x 50 x 74