FLAMIC S.R.L. 5 Via dell’Artigianato, 36035 Marano Vicentino (Vicenza) - Italy
4
Dough sheeter SF450 - SF500 - SF600 Operation and maintenance manual (translation of original instructions) – Ed. 10/2016
Rev.02 10/2017
All rights reserved. Reproduction in whole or in part of this manual is prohibited.
EC DECLARATION OF CONFORMITY
The company
FLAMIC s.r.l. Via dell’Artigianato, 5 36035 Marano Vicentino (VICENZA) - Italy
(Vat No. and Tax Code 03198710240)
through its legal representative, dott. Michele Stella
HEREBY DECLARES
that the DOUGH SHEETER Serial No. ………….
(see ticked item)
SF450B SF500 SF600
SF450BV SF500V SF600V
SF500B SF600V + ST600
SF500BV
the function of which is to roll dough by passing it repeatedly between two rollers, by reversing its direction; the
distance between the rollers of which can be adjusted between one pass and another in order to obtain a sheet
of the required thickness and (only for the SF600V + ST600) regularly shaped pieces of dough that will undergo
further processing outside the machine in order to obtain pastry and bakery products,
complies with the relevant provisions of:
- Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and
amending directive 95/16/EC (and implemented by the Italian State with Legislative Decree No. 17 of
27/01/2010)
- Directive 2014/30/EU of the European Parliament and of the Council
- Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 on
materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and
89/109/EEC.
The technical file of the machine is held by dott. Michele Stella, as the legal representative.
Dott. Michele Stella
(Legal Representative)
Marano Vicentino, ……………….
To Next Page
Loading...
