FLAMIC S.R.L. 5 Via dell’Artigianato, 36035 Marano Vicentino (Vicenza) - Italy
16
Dough sheeter SF450 - SF500 - SF600 Operation and maintenance manual (translation of original instructions) – Ed. 10/2016
Rev.02 10/2017
All rights reserved. Reproduction in whole or in part of this manual is prohibited.
2.7 IDENTIFICATION PLATE
The CE marking, manufacturer’s data, serial number, year of construction, weight and electrical data have been
indelibly marked (screen printed and punched) on the data plate, shown in Figure 7, which has been fixed
permanently (via screws or rivets) to the machine in the position indicated in the same figure.
Figure 7 - Identification plate and its position
Holes for screws or rivets
To Next Page
Loading...
