FLAMIC S.R.L. 5 Via dell’Artigianato, 36035 Marano Vicentino (Vicenza) - Italy
60
Dough sheeter SF450 - SF500 - SF600 Operation and maintenance manual (translation of original instructions) – Ed. 10/2016
Rev.02 10/2017
All rights reserved. Reproduction in whole or in part of this manual is prohibited.
5.3 SAFETY SIGNS
The following safety signs are fixed to the machine:
Check the condition of the images and the colours of the signs. Replace them as soon as they begin to
show the slightest sign of deterioration.
Electrocution hazard (electric shock)
on the outside of each enclosure containing live electrical components > 24 V
WARNING! Trapping, dragging and crushing of hands hazard
(on both edges of the tables next to the danger zones A and C. See section 5.2.1)
Do not remove the safety guards and/or disable the safety devices
(on the upper part of the fixed side guards on the uprights)
Do not clean, lubricate etc. moving parts of the machine when in motion
(on the upper part of the fixed side guards on the uprights)
6 DISPOSAL
If you wish to scrap the machine, separate the various components according to the type of material they are
made of and then dispose of them in compliance with current laws and regulations. The most important items
are listed below:
Stainless steel: catch pan, interlocked guards
Steel: pinions, crown gears, chains
Painted steel: support structure, table frames, residue collection trays (apart from SF450), lower
casing of the base.
Chrome steel: rollers
Burnished steel: drive pulley
Aluminium alloy: rolling pin rolls
Cast iron: levers, pulleys other than the drive pulley, bushes
Plastic: casing on the sides of the uprights and above the rolling zone, conveyor belts, the
scraper blade, spacers, rolling pin hand grips, buttons, electrical enclosure
Rubber: drive belts
Various materials: motor (copper windings), cables (copper conductor, electrical and electronic
components)
The parts contaminated with lubricants (e.g. gears, chains, bearings) should be disposed of separately. Use
companies specialized in waste disposal in conformity with applicable laws.
To Previous Page
Loading...
