150718 PLYFLY rev A_GoKart | Aug ust 7, 2 015 5 :08 PM
Overview of the required hardware
№ DESCRIPTION REFERENCE
5 Button Socket Head Cap Screw
Zinc Plated, Steel, M8, 12mm L
TOTAL OF 5 PROVIDED PN 12515
1 Hex head cap screw
5/16”‑18, 1.25 L
4.0 HP MODEL PN 125 43
1 Hex Cap Screw
1/4”‑20, 1” L
2.5 HP MODEL PN 12554
1 Flat Washer
5/16” ID, 7/8” OD
P N 12516
1 Fender washer
5/16” ID, 1‑1/8” OD
PN 12555
1 Lock washer
5/16” ID
1 Clutch Key
3/16”, 1/2” L
P N 125 57
2 Set Screw
Clutch
P N 125 63
1 Pan head
M6, 12 mm L
4.0 HP MODEL PN 125 64
PART 8
Flat Washer
5/16” ID, 7/8” OD
3 SINGLE WHEEL KIT P N 12516
2 LIVE AXLE KIT PN 12516
2 Shaft Collar
5/8” ID
PN 12540
2 Lock Nut
5/8"‑11
P N 125 0 6
1 Rear driven wheel
10”D
SINGLE WHEEL KIT P N 125 90
3 Undriven wheel
10” D
SINGLE WHEEL KIT P N 125 91
2 Rear driven wheel
10”D
LIVE AXLE KIT PN 125 9 0
Overview of the required hardware
№ DESCRIPTION REFERENCE
2 Undriven wheel
10” D
LIVE AXLE KIT PN 125 91
1 Rear driven wheel
12” D
SINGLE WHEEL KIT P N 125 92
3 Undriven wheel
12” D
SINGLE WHEEL KIT PN 125 93
1 Key
3/16” square, 1”L
P N 125 39
PART 9
2 Fillister Head Screw
5/16”‑18, 3/4” L
PN 125 5 3
1 T‑Handle
Quick Release Pin
PN 125 42
1 Flag
Plyy ag
PN 125 3 5
PART 10
20
Spax Screw
1 #8, 1‑1/2” L
PN 12519
1
Green Elastic Cord
3/16” OD, 18” L
PN 12 517
Note There are 2 types of button socket head cap screws
provided in every kit. They appear to be similar in
size but are not. The easiest way to dierentiate the
2 sizes, is by the number of screws provided.
40
10 Putting the go‑kart together
To Next Page
Loading...