Flexim FLUXUS F801 User Manual

FLUXUS ADM 8027, F801, ADM 8127B A Menu Structure
148 UMFLUXUS_F8V4-6-1EN, 2018-10-10
confirmation that the changes are to be saved
This display will only be indicated if a new fluid has been entered or the pa-
rameters of an existing fluid have been changed.
program code
selection of the displays for the input of a program code
defining a program code
input of the break code (= program code)
input of the access code (= the first three digits of the program code)
After the input of HotCode 071001
input of the lower limit of the inner pipe diameter for the displayed transducer
type
range: 3...63 mm
x
INIT-resis-
tant
Save changes
no >YES<
Special Funct. ↕
set program code
set program code
------
INPUT BREAK_CODE
CODE: 000000
INP. ACCESS CODE
CODE: 000000
DNmin Q-Sensor
15 mm

Flexim FLUXUS F801 Specifications

General

Brand	Flexim
Model	FLUXUS F801
Category	Measuring Instruments
Language	English