8 Installation of the Transducers FLUXUS F808, F809
UMFLUXUS_F808_8091V1-2-1EN, 2019-08-23 85
• Put the covers with the transducers on the rail.
• Correct the transducer distance, if necessary (see section 10.6.1 and 10.6.2).
• Tighten the screws of the cover (see Fig. 8.26).
Note! Make sure that the coupling foil remains on the contact surface of the transducers.
Fig. 8.26: Transducers with Variofix L on the pipe
screws of
the cover
To Next Page
Loading...
