15 Data logger
15.5 Transmission settings FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
122
15.5 Transmission settings
•Select Special functions\Data logger\Transmission settings.
This display will only be indicated if the transmitter has an RS485 interface.
• Press ENTER.
The channels for the serial transmission can be activated and deactivated.
• Select a channel with key or .
• Press key or to activate or deactivate the channel.
• Press ENTER.
•Select On if the space characters are not to be transmitted.
• Press ENTER.
The file size will be considerably smaller (shorter transmission time).
• Select the decimal marker to be used for floating-point numbers (point or comma).
• Press ENTER.
This setting depends on the setting of the operating system of the PC.
• Select the character to be used to separate columns (semicolon or tabulator).
• Press ENTER.
•Select Yes to transmit time and date.
• Press ENTER.
Special functions\Data logger\Transmission settings\Serial output channel
: the channel is activated
: the channel is deactivated
Special functions\Data logger\Transmission settings\Delete spaces
Special functions\Data logger\Transmission settings\Decimal marker
Special functions\Data logger\Transmission settings\Column separator
Special functions\Data logger\Transmission settings\Time/date
To Next Page
Loading...
