Flexim FLUXUS WD - Product Description; Measuring System; Handling Concept

4 Product description
FLUXUS WD 4.1 Measuring system
19
UMFLUXUS_WDV1-3EN, 2018-07-16
4 Product description
4.1 Measuring system
The measurement system consists of a transmitter, the ultrasonic transducers and the pipe on which the measurement is
carried out, see Fig. 4.1.
The ultrasonic transducers are mounted on the pipe. They send and receive ultrasonic signals through the fluid.
The transmitter controls the measuring cycle, eliminates noise signals and analyzes useful signals. The measured values
can be displayed, used for calculations and transmitted by the transmitter.
4.2 Handling concept
The transmitter is operated via the keyboard.
By pressing key or the following program branches are displayed consecutively:
•Parameters
•Measurement
•Options
•Special functions
A program branch is displayed between 2 arrows , see Fig. 4.2.
Fig. 4.1: Example for a measurement arrangement
1 – transducer
2 – pipe
3 – transmitter
1
2
3
Fig. 4.2: Display of the program branch Parameters
1–display
2–keyboard
A
B
SNAP
DISP
DISP
MODEFAST
MUX
NEXT
Q
ON
Q+Q-
3x Q
OFF
LAN
USB
A+ B- P1+ P2+ P3+ P4+
P5a
P6a P7a
S S P1- P2- P3- P4-
P5b
P6b P7b
X2 X3
X_AV
KL11 KL12 KL7KL8 KL9KL10
KL4
X_AR X_BV X_BR
T1A T1B S1 T2A T2B T3A T3B S3 T4B T4A
T1a T1b S1 T2a T2b T3a T3b S3 T4b T4a
N(-)
PE
L(+)
AV AVS AGN ARS AR BV BVS BGN BRS BR
1
2